Welcome to QuickOilDrainValve.com

formally known as fumotovalve.com.
We are same company and same operation!!

Authorized on-line distributor of Fumoto Engine Oil Drain Valve

How it works | N-Type Valve | Dimension of Valves & Adapters | On-Line Distributor
Endorsements | Operation | Installation | Safety | Limited LifeTime Warranty
Return & Refund | Ordering Information | Credit Card Security | Shipping & Handling

                   OVER 2 MILLION VALVES SOLD WORLDWIDE!

U.S. Patent 4078763

How it works

• One Touch Operation
• Reduces Oil Changing Time and Expenses
• Eliminates Stripped Thread
• No More Contact with Hot Oil
• No Messy Hands or Cloths
• Easy Installation
   
   

  Introducing the best way to change oil, the Engine Oil Drain Valve. Install this valve and you can drain your engine oil without tools and without mess. Just lift the lever of this solid brass ball valve and give it a quarter turn to open it. Return the lever to its original position and it locks closed, double sealed to prevent leakage. The Engine Oil Drain Valve is made of corrosion resistant forged brass and stainless steel. The ball valve design provides a straight flow for efficient drainage and a perfect seal when closed. Frozen drain plug and stripped threads are eliminated forever. Drawing samples for oil analysis is as easy as one-two-three. Sizes to fit all cars, light trucks vans heavy-duty trucks and buses. Also fits RVs, marine engines and industrial equipment.

N-Type Valve

The Engine Oil Drain Valve is also available with "Nipple" to accept hose to allow draining of the engine oil out of tight spots. It makes oil changing easy for industrial engines, boat engines and other hard-to-reach applications.


(Hose Sizes for N-type Valves)

• 3/8" I.D. --- All F-series Valves(F101N,F103N,F104N,F105N,F106N.F107N,F108N,F109N,F110N,F111N)
• 5/8" I.D. --- FG2N,FG3N,FG7BN,FG8N,T202N,T204N,T206N,T208N
• 3/4" I.D. --- FG5N,FG6N,FG8N,T200N,T201N,T203N,T205N,T207N,T211N
  
  [Left] Regular Valve [Right] N-Type (Valve with Nipple)
  

• Return to Top

  Dimension of Valves & Adapters

  • Regular - 7/8" in length (Only stick out 1/2" more than standard oil plug head.)
  • N-Type (w/Nipple) - 1 1/2" in length
  • Adapters(ADP-104,106,107,109) - 9/16" in length
  • Adapter(ADL-106) - 15/16" in length
  
  *Some oil pans are designed with recessed plug port. If part of the valve hits the oil pan before it could be fully tightened, DO NOT install the valve directly. Adapters(extension parts) are available for some models.
  

  [Left] Regular Adapter [Right] Long Adapter
  

  Return to Top

  ON-LINE DISTRIBUTOR

  YM International Company
  D/B/A QuickOilDrainValve.com
  Toll Free#: 1-866-822-5689
  FAX: 1-425-882-1539
  International Call: 1-425-882-1539

  E-Mail: info@quickoildrainvalve.com

  To: ONLINE STORE (Ordering Info.& To Order On-Line)
  To: Check Size Availability
  To: Valves for Heavy Duty Trucks/Dealer Inquiry
  To: Valves for Industrial Engine/OEM

  Return to Top

  ---

  (Endorsements)

  The Engine Oil Drain Valve has been tested and granted "Genuine Parts" status by 5 major motor vehicle manufacturers in Japan, including Nissan, Mazda, Mitsubishi, Subaru, Isuzu. These approvals were not granted easily and gaining them was a testimony to the quality and durability of Engine Oil Drain Valve.

  In the United States, the Engine Oil Drain Valve is being installed at the factory level on some of the vehicles made by Ford and Freightliner.

  (Product Reviews)

  A real corker - If life is simply a process of trying to keep your hands clean, this little gadget from Japan will help. It replaces your oil drain plug and has a spring-loaded valve so you can drop the dirty lube quickly and without tools. We put a sample valve through the Auto Week stress-test and discovered that the valve was a quality built item, the polished valve and tight seals, and a locking feature. It withstood many hours of opening and closing. - "AutoWeek Magazine"

  Goodbye drain plug - The Engine Oil Drain Valve simplifies the oil change like never before. The only thing you do to drain the oil is turn the valve's lever 90 degrees. Your hands never touch the oil, you avoid the risk of stripping the oil pan threads, and valve's double seals make it leak proof. - "Handyman Magazine"

  Oil changes can be easy as turning lever - A one time replacement with Fumoto valve eliminates all inconveniences associated with conventional drain plugs. Our test of the valve proved to be a total success. this product should make oil change faster and easier, eliminating much of the oil-change procrastination that serves only to shorten engine life. - " Motorhome Magazine"

  Return to Top

  ---

  Operation

  1. To open lift control lever and turn counter-clockwise 90 degrees.
  2. To close simply turn the lever clockwise 90 degrees until locked in original position.

  Return to Top

  Installation

  1. Remove original drain plug and drain oil into acceptable receptacle.(Open oil cap before draining oil for efficient drainage.)
  2. Insert Engine Oil Drain Valve with gasket* and tighten. Do not over tighten. (Some oil pans are designed with recessed drain hole which may prevent the valve from being installed properly. If the valve can not be tightened all the way without hitting the oil pan wall, do not install the Drain Valve to your vehicle. Adaptors are available for some models)
  3. Make sure valve is closed and refill crankcase.

  Warning
  Since the threads part of Drain Valve is made of Brass and has the hollow construction, install it by hand, and with the wrench, give only a 1/4 turn to tighten it. Please take care not to over tighten.

  *Some valves (i.e. T-200, T201, T-202, F-110) do not require gasket as they are self-tightening tapered threads.

  Return to Top

  Safety

  1. Drive carefully at all times, and if you run over any foreign object on the road, pull over and check the valve for any damage or leak.
  2. N-Series valve(with Nipple to accept hose) is not recommended for passenger cars with low ground clearance.

  Return to Top

  Limited LifeTime Warranty

  
  Fumoto Engineering of America offers a LIFE TIME WARRANTY on its product, against faulty workmanship and/or material to the original purchaser (with proof of purchase). For any defective product, Fumoto Engineering of America will replace the product at no charge. Fumoto Engineering of America will also indemnify any consequential damages to the engine/vehicle which are directly caused by the defective product. This warranty does not cover any damages due to misuse, abuse, negligence or accident. This warranty is valid only in the United States and Canada.

  Return to Top
  

  Return & Refund

  
  If you received a wrong or damaged product, or if you were not satisfied with the product, please return with original receipt placing in the package or envelope that protects the product.

  Also, please indicate the reason you are returning the product on the back of the original receipt.

  Return to Top
  

  Ordering Information

  
  For orders from U.S. and Canada, we accept the following major credit cards at our ONLINE STORE.

  Visa, MasterCard, American Express and Discover Card
  

  Price of Engine Oil Drain Valve

  F-Series Valve	$22.95	N-type(w/Nipple) $3.00 Extra
  T-Series Valve, FG-Series Valve	$25.95	N-type(w/Nipple) $6.00 Extra
  Valve Adapter for F104,F106,F107,F108,F109	$6.00
  Valve Adapter for FG7B,T205,T207	$8.00

  • F-Series Valve: Small size valves for passenger cars, light trucks/vans.
  • T-Series Valve: Large size valves for RVs/motorhomes, heavy-duty trucks.

  If you don't like using these credit cards on-line, we accept the payment by money order or personal check by mail. And we also accept credit card number by Fax or Mail (Order Form).

  Please send your payment to:
  YM International Company
  D/B/A QuickOilDrainValve.com
  P. O. Box 50253
  Bellevue, WA 98015
  Toll Free#:1-866-822-5689
  Fax:1-425-882-1539
  International Call: 1-425-882-1539
  Please make a check payable to : YM Interational Company

  Return to Top

  Credit Card Security

  Shopping online with us is safe and easy.

  We encrypt your credit card number and all other personal information, so that it is unreadable in transit over the Internet from you to us. The security of your credit card information -- as well as all your personal information -- is our top priority.

  In fact, entering your credit card number on our site is safer than using it at a retail store or restaurant!

  But if you still don't feel secure, please use our Fax Order Form to fax in your order to us.

  Fax:425-882-1539

  Return to Top

   

  Shipping & Handling

  
  U.S. Domestic Shipping and Handling

  USPS Standard	3 - 7 days after shipping	$4.00 for the First Item + $1.00 for ea. Extra Items
  Express Shipping	It takes 1~2 days after shipping depending on your area	$4.00 plus $14.00 Surcharge

  
  Canada Shipping and Handling

  USPS Standard	7 - 10 days after shipping	$6.00 for the First Item + $1.50 for ea. Extra Items
  Express Shipping	It takes 3~5 days after shipping depending on your area	$6.00 plus $20.00 Surcharge

  
  International Shipping and Handling
  

  Global Priority Mail	$14.00 for First Item + $2.00 for ea. Extra Items.
  Global Express Mail	$14.00 plus $20.00 Surcharge

  ---

  Distributed by:
  YM International Company
  D/B/A QuickOilDrainValve.com
  P.O. Box 50253
  Bellevue, WA 98015
  Toll Free#:1-866-822-5689 (U.S. only)
  Fax:1-425-882-1539
  International Call: 1-425-882-1539
  Email: info@quickoildrainvalve.com

  Return to Top